●Bits per second: 19200
●Data Bit: 8
●Parity: None
●Stop Bit: 1
●Flow Control: None
The tasks required to create a controller WLAN using the GUI include:
●“Configuring Access to the GUI Using the GE1 Port”
●“Logging into the Controller for the First Time”
●“Creating a RF Domain”
●“Creating a Wireless Controller Profile”
●“Creating a WLAN Configuration”
●“Creating an AP Profile”
●“Completing and testing the configurations”
Set the computer to use an IP address between 192.168.0.10 and 192.168.0.250 on the connected port. Set a subnet / network mask of 255.255.255.0.
Once the computer has an IP address, point the Web broswer to: https://192.168.0.1/ and the following login screen will display.
Logging into the Wireless Controller for the First Time
●User Name: admin
●Password: admin123
Configuring the Controller’s GE1 Interface
Assign the IP address 172.16.0.1, with the mask 255.255.255.0 to switch port ME1.
1Navigate to the GE1 interface using the following commands:
WM3400-571428>enable
WM3400-571428#
WM3400-571428#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
WM3400-571428(config)#
WM3400-571428(config)#self
WM3400-571428(config-device-03-14-28-57-14-28)#
2Create a VLAN and assign the IP address 172.16.0.1 to it.
WM3400-571428(config-device-03-14-28-57-14-28)#interface vlan 1
WM3400-571428(config-device-03-14-28-57-14-28-if-vlan1)#ip address
172.16.0.1
WM3400-571428(config-device-03-14-28-57-14-28-if-vlan1)#commit write
WM3400-571428(config-device-03-14-28-57-14-28)#
3Configure the GE 1 port to use the VLAN 1.
Summit® WM3000 Series Controller System Reference Guide
33
WM3400-571428(config-device-03-14-28-57-14-28)#interface ge 1
WM3400-571428(config-device-03-14-28-57-14-28-if-ge1)#
WM3400-571428(config-device-03-14-28-57-14-28-if-ge1)#switch port
access vlan 1
WM3400-571428(config-device-03-14-28-57-14-28-if-me1)#exit
WM3400-571428(config-device-03-14-28-57-14-28)#
WM3400-571428(config-device-03-14-28-57-14-28)#commit write
沒有留言:
張貼留言